Turbine OEM’s are designing their units to improve efficiency and this will require lubricant manufacturers to keep pace. GE has introduced a new energy efficient turbine oil specification, GEK 121603. Jenbacher realized that their turbines could withstand extended oil life cycles and reduce life cycle costs. Mobil has worked with GE and Jenbacher to develop…

Coolants should be tested at every PM or at least twice per year. The table below shows what’s important: CHARACTERISTIC WHAT TO LOOK FOR Color If does not match original coolant, indicates mixed coolant Clarity Above 11 indicates soft metal damage / Below 7 indicates corrosion issues pH Needs to be -12F to -65F Chemical…

Mobil Delvac engine oils are proven to lower oil consumption, increase fuel economy and reduce waste. All of these are examples of sustainability and can be referenced when demonstrating your ESG commitment. Furthermore, these attributes contribute to growing your bottom line by reducing costs and improving equipment availability. Mobil Delvac Super 10W-30 reduced oil consumption…

One of the most common complaints when using metalworking fluids is skin irritation, or contact irritant dermatitis. This condition results in dry, scaly inflamed skin because the fluid has removed the natural oils on your skin. These oils help retain water in your skin and when it is removed, the water evaporates from you skin,…

The National Grease Lubricating Institute (NLGI) has issued new High Performance Multiuse (HPM) grease specifications. The Water Resistant (WR) specification has three characteristics: Water Washout –HPM+WR will reduce the amount of grease that can be lost when subjected to water from 10% to 5%. Water Spray Resistance – This is a more severe test and…