One of the most common complaints when using metalworking fluids is skin irritation, or contact irritant dermatitis. This condition results in dry, scaly inflamed skin because the fluid has removed the natural oils on your skin. These oils help retain water in your skin and when it is removed, the water evaporates from you skin, […]
Metalworking fluids, whether they are water-dilutable or straight oils, contain several additives. These additives are added to help increase lubricity, prevent corrosion, inhibit bacteria growth, reduce foam and other specific functions. Here are some of the most common additives and what you should know about them: Lubricity – These are typically chlorine, sulfur, phosphorous, calcium […]
The Discovery of Titanium Titanium was discovered before 1800 and was named after the Titans, the sons of the Sky and Earth gods in Greek mythology. Ever since that time, titanium has been recognized as having one of the highest strength-to-weight rations of any metal. Once it was realized that titanium would work well as […]
Flutes Generally, tools with more flutes have a larger core and smaller flute valleys than tools with fewer flutes. Traditionally, end mills came in either a 2 flute or 4 flute option. The widely accepted rule of thumb was to use 2 flutes for machining aluminum and non-ferrous materials, and 4 flutes for machining steel and harder alloys. […]
A metalworking fluid is a complex mixture of chemicals that can damage the environment. Make sure to check out your SDS to make sure you know what the fluid can do when not used properly. Your SDS needs to be GHS compliant to meet current regulations and should guide you through use and disposal. If […]
Working in an industrial environment has built in hazards. Although the conditions for these hazards are unavoidable, accidents can be prevented. Below you will find common accidents and tips to helping avoid them. Injuries from material handling and repetitive strain – PPE exists for most hazards and helmets, belts, safety glasses/shoes and ear protection must […]
When it came to the number of flutes in end mills, the rule of thumb was to use two flutes for aluminum and four for steel. This was due to the size of the flutes and their ability to efficiently evacuate chips. Since the more flutes you have the smaller the flute size, it’s hard […]