Engine coolant are often referred to as anti-freeze. This is because the original coolants were mostly water and they had to figure out how to keep them from freezing in the winter. So, what’s in coolant/anti-freeze: Glycol – 50% Water – 46% Corrosion Inhibitors – 4% While glycol and water levels will stay pretty consistent,…

CNC’s cost a lot of money and, the problem is, you’re paying for those machines weather or not they are running. Maximizing machine uptime is critical to the success of any shop and achieving this goal can be elusive. The missing link to getting the most out of your machines is a lack of data…

The Discovery of Titanium Titanium was discovered before 1800 and was named after the Titans, the sons of the Sky and Earth gods in Greek mythology. Ever since that time, titanium has been recognized as having one of the highest strength-to-weight rations of any metal. Once it was realized that titanium would work well as…

Flutes Generally, tools with more flutes have a larger core and smaller flute valleys than tools with fewer flutes. Traditionally, end mills came in either a 2 flute or 4 flute option.  The widely accepted rule of thumb was to use 2 flutes for machining aluminum and non-ferrous materials, and 4 flutes for machining steel and harder alloys.…

A metalworking fluid is a complex mixture of chemicals that can damage the environment. Make sure to check out your SDS to make sure you know what the fluid can do when not used properly. Your SDS needs to be GHS compliant to meet current regulations and should guide you through use and disposal. If…

Working in an industrial environment has built in hazards. Although the conditions for these hazards are unavoidable, accidents can be prevented. Below you will find common accidents and tips to helping avoid them. Injuries from material handling and repetitive strain – PPE exists for most hazards and helmets, belts, safety glasses/shoes and ear protection must…